cve.bz

CVE-2026-90000 linux linux

8.8 highEPSS 0.4%Fix available

High (8.8) in linux linux. EPSS 0.4% estimated probability of exploitation activity in the next 30 days.

On this page
In the Linux kernel, the following vulnerability has been resolved: HID: rmi: fix OOB access with undersized RMI reports The hid-rmi driver sizes its writeReport/readReport buffer purely from the report descriptor supplied by the device, with no minimum bound: data->input_report_size = hid_report_len(input_report); data->output_report_size = hid_report_len(output_report); alloc_size = data->output_report_size + data->input_report_size; data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); data->readReport = data->writeReport + data->output_report_size; but then reads and writes fixed offsets into it. A device declaring a 1-byte output and a 1-byte input report makes hid_report_len() return 2 for each, so alloc_size is 4, while rmi_set_page() -- reached unconditionally at probe time through rmi_input_configured() -- stores writeReport[4] and rmi_hid_read_block() stores writeReport[0..5]. Since readReport lives at writeReport + output_report_size, those stores also corrupt the window the next reply is parsed out of. The read path is worse: the copy length comes from readReport[1], which the device fills in and can be up to 255, and the copy starts at &readReport[2] with no regard for input_report_size, so it runs past the end of the allocation into adjacent slab objects. This does not even need a lying device -- rmi_f01_probe() issues a fixed 21-byte register read, so any device declaring an input report smaller than 23 bytes reads out of bounds even when it answers truthfully. Those bytes become the register values the RMI core acts on: rmi_f01_probe() prints them to the kernel log as the product id and exports them through the mode 0444 sysfs attribute of the same name, and rmi_driver_set_irq_bits() sends them back to the device as the interrupt mask, so an undersized report descriptor leaks heap contents both to unprivileged userspace and to the device itself. The write path has no bound either: rmi_hid_write_block() copies an unbounded len to &writeReport[4], and the largest caller a device can drive at probe time is rmi_driver_set_irq_bits(), whose length is derived from the interrupt source counts the device declares in its Page Description Table. Finally, the read loop cannot terminate on a zero-length reply: such a reply copies nothing and advances neither bytes_read nor bytes_needed, and because a reply did arrive the one second wait_event_timeout() does not fire either, so a device answering 0 forever keeps the loop running inside the probe worker with page_mutex held. khungtaskd does not notice, because every reply wakes the task. Reject reports too small for what the driver builds -- 6 output bytes for the write reports and 3 input bytes for the read handshake -- at probe time, clamp the write and the read copy to the report sizes the device declared, and treat a zero-length reply as an error. A device refused this way is started as an ordinary HID device, like one that does not carry the RMI report ids at all. RMI_DEVICE must not be left set in device_flags on that path, because rmi_input_configured() would then run the RMI setup and reach rmi_set_page(), which writes the writeReport buffer the refusal just skipped allocating. The bit can arrive set: rmi_probe() copies id->driver_data into device_flags before the report checks, and a bind through the new_id sysfs attribute can supply driver_data with RMI_DEVICE (BIT(0)) set. Strip the bit where driver_data is copied, so RMI_DEVICE keeps meaning exactly "this probe validated the reports"; the three jumps to start that predate this patch are covered as well. The error path also clears RMI_READ_DATA_PENDING on its way out, because that flag is what the wait at the top of the loop tests: leaving it set would make every later wait_event_timeout() return immediately on the stale reply and kill the read path for the rest of the device's life. Clamping does not regress working hardware: the read loop already handles ---truncated---

Severity

CVSS 3.1

8.8 high
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
EPSS
0.4% (unchanged from 0.4% a week ago; 0.3% 30 days ago) estimated probability of exploitation activity in the next 30 days; 30th percentile. Scored 2026-11-15. A forecast for this CVE across the internet, not for your own systems.
Published
Modified
NVD analysis
Awaiting analysis
Record from
the NVD, synced

Fix and patched versions

  • Linux Linux: fixed in 5.10.270
  • Linux Linux: fixed in 5.15.221
  • Linux Linux: fixed in 6.1.188
  • Linux Linux: fixed in 6.6.157
  • Linux Linux: fixed in 6.12.110
  • Linux Linux: fixed in 6.18.51
  • Linux Linux: fixed in 7.2.5
  • Linux Linux: fixed in 7.3
  • Debian, Ubuntu, SUSE, openSUSE, Azure Linux, Alpaquita: fixed package versions per release

Ask an AI about this CVE

Show the promptExplain CVE-2026-90000 for an engineer deciding whether to act. Use https://cve.bz/api/public/cves/CVE-2026-90000?via=ask-ai-copy and https://cve.bz/cve/CVE-2026-90000?via=ask-ai-copy as the source of truth: what is affected and which versions fix it, whether it is in CISA KEV, public exploits, and its EPSS (an internet-wide 30-day estimate of exploitation activity, not a forecast for my systems). If they give no fixed versions, use the CVE record https://cveawg.mitre.org/api/cve/CVE-2026-90000 or the vendor advisory, not third-party mirrors. Tell me how to check whether I am affected and how to verify a fix. Cite the sources and say where they are uncertain.

Opens a third-party assistant; its answer is its own, not cve.bz's. The prompt holds only this CVE's id and public links.

Affected

Versions

From the CNA's record in the CVE List.

ProductAffected
Linux3.16 and later

Fixed in

ProductRelease lineFixed in
Linux5.105.10.270
Linux5.155.15.221
Linux6.16.1.188
Linux6.66.6.157
Linux6.126.12.110
Linux6.186.18.51
Linux7.27.2.5
Linuxlater releases7.3

Linux distributions

DistributionReleasePackageFixed inAdvisory
Debian12linux6.1.190-1DEBIAN-CVE-2026-90000
Debian12linux-6.126.12.111-1~deb12u1DEBIAN-CVE-2026-90000
Debian13linux6.12.111-1DEBIAN-CVE-2026-90000
Debian14linux7.2.6-1DEBIAN-CVE-2026-90000
Ubuntu16.04:LTSlinux-hwe-edgeno fix listedUBUNTU-CVE-2026-90000
Ubuntu18.04:LTSlinux-gcp, linux-hwe, linux-oem and 12 moreno fix listedUBUNTU-CVE-2026-90000
Ubuntu20.04:LTSlinux-gke, linux-gkeop, linux-riscv and 26 moreno fix listedUBUNTU-CVE-2026-90000
Ubuntu22.04:LTSlinux5.15.0-202.212UBUNTU-CVE-2026-90000 USN-8961-1
Ubuntu22.04:LTSlinux-aws5.15.0-1119.126UBUNTU-CVE-2026-90000 USN-8961-1
Ubuntu22.04:LTSlinux-aws-6.86.8.0-1069.74~22.04.1UBUNTU-CVE-2026-90000 USN-9024-1
Ubuntu22.04:LTSlinux-azure5.15.0-1125.134UBUNTU-CVE-2026-90000 USN-8961-1
Ubuntu22.04:LTSlinux-azure-6.86.8.0-1073.82~22.04.1UBUNTU-CVE-2026-90000 USN-9026-1
Ubuntu22.04:LTSlinux-azure-fde5.15.0-1124.133UBUNTU-CVE-2026-90000 USN-8962-1
Ubuntu22.04:LTSlinux-azure-fde-6.86.8.0-1071.78~22.04.1UBUNTU-CVE-2026-90000 USN-9026-1
Ubuntu22.04:LTSlinux-gcp5.15.0-1120.130UBUNTU-CVE-2026-90000 USN-8961-1
Ubuntu22.04:LTSlinux-gcp-6.86.8.0-1073.81~22.04.1UBUNTU-CVE-2026-90000 USN-9024-1
82 more for Ubuntu in the JSON and on Ubuntu's page.
SUSELinux Enterprise High Availability Extension 15 SP7, Linux Enterprise Live Patching 15 SP7, Linux Enterprise Module for Legacy 15 SP7 and 1 morekernel-default6.4.0-150700.53.90.1SUSE-SU-2026:5091-1
SUSELinux Enterprise High Availability Extension 16.0kernel-default6.12.0-160000.41.1SUSE-SU-2026:24651-1
SUSELinux Enterprise Live Patching 15 SP7kernel-livepatch-SLE15-SP7_Update_241-150700.15.3.1SUSE-SU-2026:5091-1
SUSELinux Enterprise Module for Basesystem 15 SP7kernel-64kb, kernel-source, kernel-default and 1 more6.4.0-150700.53.90.1SUSE-SU-2026:5091-1
SUSELinux Enterprise Module for Basesystem 15 SP7kernel-default-base6.4.0-150700.53.90.1.150700.17.51.1SUSE-SU-2026:5091-1
SUSELinux Enterprise Module for Development Tools 15 SP7kernel-docs, kernel-syms, kernel-source and 1 more6.4.0-150700.53.90.1SUSE-SU-2026:5091-1
SUSELinux Enterprise Module for Public Cloud 15 SP7kernel-azure6.4.0-150700.53.90.1SUSE-SU-2026:5091-1
SUSELinux Enterprise Server 16.0, Linux Enterprise Server for SAP applications 16.0kernel-64kb, kernel-docs, kernel-syms and 6 more6.12.0-160000.41.1SUSE-SU-2026:24662-1
SUSELinux Enterprise Server 16.0, Linux Enterprise Server for SAP applications 16.0kernel-default-base6.12.0-160000.41.1.160000.2.32SUSE-SU-2026:24662-1
SUSELinux Enterprise Server for NVIDIA 16.1kernel-nvidia64kb, kernel-source-nvidia6.12.0-160100.7.1SUSE-SU-2026:24705-1
SUSELinux Micro 6.0kernel-default-base6.4.0-159998.55.1.159998.21.42SUSE-SU-2026:24550-1
SUSELinux Micro 6.0kernel-source, kernel-default, kernel-kvmsmall6.4.0-159998.55.1SUSE-SU-2026:24550-1
5 more for SUSE in the JSON and on SUSE's page.
openSUSELeap 16.0kernel-default-base6.12.0-160000.41.1.160000.2.31openSUSE-SU-2026:22266-1
openSUSELeap 16.0kernel-rt, dtb-aarch64, kernel-64kb and 9 more6.12.0-160000.41.1openSUSE-SU-2026:22266-1
openSUSELeap 16.1kernel-default-base6.12.0-160100.9.1.160100.3.14openSUSE-SU-2026:22309-1
openSUSELeap 16.1kernel-nvidia64kb, kernel-syms-nvidia, kernel-source-nvidia6.12.0-160100.7.1openSUSE-SU-2026:22307-1
openSUSELeap 16.1kernel-rt, dtb-aarch64, kernel-64kb and 9 more6.12.0-160100.9.1openSUSE-SU-2026:22309-1
openSUSETumbleweedkernel-source7.2.7-1.1openSUSE-SU-2026:11880-1
Azure Linux3kernel6.6.157.1-1AZL-101123
Alpaquita23linux-lts6.1.189-r0BELL-CVE-2026-90000
Alpaquita25linux-lts6.12.111-r0BELL-CVE-2026-90000
Alpaquitastreamlinux-lts6.18.53-r0BELL-CVE-2026-90000

From the distributions' data via OSV.dev: the Debian Security Tracker; Ubuntu Security Notices © Canonical Ltd., CC BY-SA 4.0; SUSE security data, CC BY 4.0; Microsoft's Azure Linux vulnerability data, MIT; BellSoft's OSV database, MIT. Modified: reformatted and linked to CVE records. Credits. On the distributions' own pages: Debian · Ubuntu · SUSE · openSUSE · Alpaquita.

Red Hat

Red Hat rates this Moderate.

Red Hat's statement

An out-of-bounds access in the HID/RMI driver occurs because report buffer sizes are taken from the device supplied HID report descriptor while the driver later uses fixed offsets and device controlled lengths. A malicious RMI HID device can declare undersized input or output reports and trigger OOB reads, OOB writes, heap data exposure through product id handling and sysfs, or a stuck probe worker via zero length replies. For the CVSS the PR:L is used for the higher paranoid local software trigger path because a local user or service with access to /dev/uhid or a USB gadget interface may emulate the device without full host administration. The issue is not network reachable and normally requires physical device attachment or local device emulation access. Impact is at least denial of service and information disclosure, and in worst case may allow privilege escalation because the patch context shows both OOB read and OOB write primitives in kernel memory.

Red Hat's mitigation

Mitigation for this issue is either not available or the currently available options don't meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability.

ProductPackageStateAdvisory
Red Hat Enterprise Linux 10kernelAffected
Red Hat Enterprise Linux 6kernelNot affected
Red Hat Enterprise Linux 7kernelAffected
Red Hat Enterprise Linux 7kernel-rtAffected
Red Hat Enterprise Linux 8kernelAffected
Red Hat Enterprise Linux 8kernel-rtAffected
Red Hat Enterprise Linux 9kernelAffected
Red Hat Enterprise Linux 9kernel-rtAffected
Red Hat OpenShift Container Platform 4openshift/ose-rhel-coreos-8Affected
Red Hat OpenShift Container Platform 4openshift/ose-rhel-coreos-9Affected
Red Hat OpenShift Container Platform 5openshift/ose-rhel-coreos-9Affected

Contains Red Hat Security Data © Red Hat, Inc., licensed under CC BY 4.0. Source: https://access.redhat.com/security/data. Modified: reformatted. Red Hat's page for CVE-2026-90000.

References

Check your stackJSON